The soft keys window either needs to be angled up so it can be seen straight on from a seated position, or there needs to be an adjustment for viewing angle. If it were angled up it would have the added benefit of a less deep footprint.
I could do without the transport section. I never use it and find the Pro Tools key commands faster. It eats up valuable real estate. I would rather either lose the right side of the console and move the buttons underneath the soft keys to make it smaller, or have four more faders on the right side for a total of eight.
Latest firmware/driver update Sept 1 2011 I just have to throw a thanks out into the void to Avid for the latest update. I was bitching and screaming about the faders for years.... mainly that when they reset to zero or you bank switch - all the fader slam down with such force that you could literally launch an object across the room with the faders... or more commonly - they hit the bottom of the fader area with... more »
Easier access to change fader automation states and see an indication as to what state the fader is in.
I think the MC Color would be great as surround panners -
Think of it - could be simple to implement as there's no moving parts with the balls. Once you let go - the control sound is in position.. and when you touch the ball again - you could move it around accordingly. Might not be as dead-accurate as a Joystick - but would still be very usefull! :)
A frame that can be populated with control modules such as a fader, knob, transport control, music keyboard, drum pad. Some modules would be square and take up a 1x1 space such as a single knob, some would take up a much larger space like a music keyboard. We all do different jobs and we all use ProTools for our own purposes. Some record, some mix and some master. Some people are sound designers and some are songwriters.... more »
Is it possible to have surround panner on MC control touch screen working with Digital Performer 7 and correct it with PT ? Surround seems to be a bit forsaken on Artist Series. See http://protools.ideascale.com/a/dtd/MC-Control-Surround-Panner-can-t-pan-to-all-areas-correctly/29358-3779 - Submitted by 619902583 1 year ago
Why doesn´t eucon remember the order of the units and faders.
It gets very confusing with your custom layouts if the faders are never in the same order
Hi, It should be very useful if AVID add more 2 touch button beside tracks and before soft keys and surround and setup...... I think Group like D-control, in this button the lcd screen should be display all groups present in the session and press for ex DRUMS all fader show up the tracks relative to DRUMS group, eccc. Another button should be MASTER and the lcd display shuold show the master as: audio track, midi track,... more »
In the EuCon Settings Softkeys tab: It would be great if that screen could be made active in functionality via a check box whereas selecting a button there was the same as selecting it on the Softkeys. You could leave the desired button pages open like a palette and click on it as you would the Artist touch screen to relegate a command. I.E., the surface keys could be showing a whole screen of commands, not just the 12... more »
Since the artist transport seems to be intended as a right handed device, it would make much more sense to have the shift key where the workstation key is. That way you could easily press the shift key with your thumb in combination with any other key. Right now you have to go through some plastic surgery first before you can use the transport single-handed in a convenient way. For now I m using it left-handed which has... more »
The plugin layout for EQ3 is horrendous. Specifically having to switch between Q and frequency is ridiculous. I always need both of those controls at the same time. I would much rather have an extra page of parameters than have to switch to Q any time I need it. Custom plugin mapping would solve this problem as well but this seems pretty basic and is not a problem on any of the other avid control surfaces.
Transport online has two states in Pro-tools... when it's waiting (the transport online button is flashing) and when Protools is locked and chasing (transport online is actively chasing).
If I assign 'transport online" to a button on my MC Transport.. the light is always solid, regardless of the state.
This should mimic the button in protools... either fully off, flashing, or solid when chasing is active.
Allow the selection of pre or post insert when patching cascade on the mix busses. This would allow the other mixer to use the processing on the buss.
On any Selected tracks the Automation control mode cannot be assigned via the touchscreen or Softkeys. You can select the Automation mode with a mouse but not with the menus on the MC Control. This bug need to be fixed once you start to use the MC Control you get use to it and it is an interuption to your workflow to have to grab the mouse or trackball to change the status of Automation. I would like to see this fixed... more »