Badges [ 6 ] [-]
Memberships [ 1 ] [+]
Activity Stream [+]
Ideas Contributed [ 15 ] [+]
This is still present in EuCon 3.3.1 and PTHD12.2 latest firmware on S3. 1. make two tracks, insert any EQ (tested on Waves, Flux, Avid, MHalo) 2. on track 1 enable all EQ bands - make selection of 30sek and manual write automation. then make another 30sek selection after and disable all bands and write automation 3. do the opposite on track two. first 30sek all bands disables, then 30sek all bands enabled. 4. attention ...more »
while I like the new VCA spill feature I wonder if there is a way of not "attentioning" the VCA fader you want to spill.
because the way it is right now on the S3, you loose your upper row of knobs whenever you enter VCA spill mode. (the S3 asks you if you want to add EQ or DYN on the VCA....)
a surround panner...
...if possible with multitouch control since we are on an iPad...
coming from a ProControl I am missing the Talkback feature.
The S3 has everything built in to do that:
2 Mic inputs, A footswitch input and an unused button ("Mons to Mix)"
It only needs some tweaks in the firmware...
In AFL/PFL Solo , switching layouts on the S3 clears solo on tracks.
If I adjust the input gain trim the settings are not saved, so I have to adjust the gain everytime I power on the S3.
This might make sense for Mix Groups but certainly not for Edit Groups.
Make Edit Group of two tracks.
Select first track of your group (or edit with "Track selection follows Edit selction")
In a session with many tracks you end up with the last member of the group being on Fader 1.
The ProTools Mixer wont show the send fader when using Quad busses (a sub path in my case)
It will show the fader when I use a 5.1 send so I guess it's a bug.
Make stereo aux
insert for example "Revibe stereo to quad"
make a send to a quad bus.
= no faders
I like the use of colours on the S3.
I think it would make sense to use the same colors (EQ, DYN, Insert) for the Channel Encoder Assign keys.
Very important in my opinion is a flashing or red LED when you have the faders in "Flip" mode.
On the right Fn Keys it would be nice to have different colors as well. But I hope they will become custom EuCon keys with custom colour anyway...
the upper OLED displays are hard to read and the knobs are in the way to see the lower line. This is a hardware issue that can't be fixed, but the upper row of the OLED is not used at all except on the first display that shows you the name of the attentioned track. It would be cool to replace the values now shown as bars with actual numbers or text on the top row of the display. (this makes sense for EQ parameters that ...more »
you can set EuCon to select tracks via touching faders
that way I can't use latch prime.
a nice feature ( as preference of course) would be to select tracks via one row of knobs instead the select button.
the select button next to the faders could then be used for future features like VCA spill...
When working in Latch mode I don't see if a track is in automation. this is important since it's easy on the S3 to accidentallly touch a fader and put in wrtie that way... -a simple solution a blinking "rw" in the display -more elegant the whole display blinking - very nice: (like on the ProControl) using the mulitcolor LEDs to indicate the automation mode and status off- off green - read red latch/touch yellow - trim ...more »